Overview
Mining
Specifications
| Dipper Payload | 70 t |
| Dipper Capacity | 20.6-55.8 m3 (27-73 yd3) |
| Note | Dependent on application and material density. |
| Dipper Payload | 64 t |
| Dipper Capacity | 20.6-55.8 m3 (27-73 yd3) |
| Note | Dependent on application and material density. |
Docs & Links
Specifications
| Dipper Payload | 70 t |
| Dipper Capacity | 20.6-55.8 m3 (27-73 yd3) |
| Note | Dependent on application and material density. |
| Working Weight - With Dipper and Standard Links | 2652000 lb |
| Ballast - Furnished By Customer | 574000 lb |
| Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection. |
| Note (2) | All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads. |
| Ground Bearing Pressure - 274.3 cm (108 in) Treads | 43 psi |
| Planetary Propel | Dual-motor independent drive. |
| Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard | 32.75 ft |
| Ground Bearing Pressure - Total Effective Bearing Area (2) | 442 ft² |
| Ground Bearing Pressure | Ground bearing pressure is dependent upon many factors. |
| Ground Bearing Pressure - Total Effective Bearing Area (1) | 343 ft² |
| Upper Works Overall Width - Including Standard Walkways | 44.25 ft |
| Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads | 34.75 ft |
| Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard | 54 psi |
| Swing | Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. |
| Hoist | A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. |
| Cutting Height - Maximum | 48.75 ft |
| Dumping Height - With Clearance to Open Dipper Door | 30.84 ft |
| Cutting Radius - Maximum | 74.75 ft |
| Radius of Level Floor | 52.49 ft |
| Revolving Frame Tail Swing Radius | 30.51 ft |
| Note (1) | Optimal working ranges based on loading a Cat® 793F truck. |
| Note (2) | *All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads. |
| Type | Automatic, single-line system for open gear lubricant and grease. |
| Components (1) | 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
| Drive | IGBT Acutrol drive system. |
| Power Requirements - Peak power | 4165 HP |
| Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V |
| Power Requirements - Average Power Demand | 777-1087 kW (1,042-1,458 hp) |
| Power Requirements - 60 Hz | 7,200V |
| Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V, 11,000V |
| Note | Other voltages available to suit customer requirements. |
| Rope Data - Crowd - Diameter | 2.5 in |
| Rope Data - Dipper Trip - Diameter | 0.625 in |
| Rope Data - Hoist - Diameter | 2.75 in |
| Rope Data - Boom Suspension - Diameter | 3.25 in |
| Rope Data - Crowd - No. | 1 |
| Rope Data - Retract - No. | 1 |
| Rope Data - Dipper Trip - No. | 1 |
| Components | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
| Rope Data - Boom Suspension - No. | 4 |
| Crowd | Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
| Rope Data - Hoist - No. | 2 |
| Rope Data - Retract - Diameter | 2.5 in |
| Note | High impact ropes available as an option |
| Components (2) | External fast fill from lower level. |
| Dipper Payload | 64 t |
| Dipper Capacity | 20.6-55.8 m3 (27-73 yd3) |
| Note | Dependent on application and material density. |
| Working Weight - With Dipper and Standard Links | 1202927 kg |
| Ballast - Furnished By Customer | 260362 kg |
| Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection. |
| Note (2) | All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads. |
| Ground Bearing Pressure - 274.3 cm (108 in) Treads | 296 kPa |
| Planetary Propel | Dual-motor independent drive. |
| Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard | 10 m |
| Ground Bearing Pressure - Total Effective Bearing Area (2) | 41 m² |
| Ground Bearing Pressure | Ground bearing pressure is dependent upon many factors. |
| Ground Bearing Pressure - Total Effective Bearing Area (1) | 32 m² |
| Upper Works Overall Width - Including Standard Walkways | 13.5 m |
| Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads | 10.6 m |
| Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard | 371 kPa |
| Swing | Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. |
| Hoist | A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. |
| Cutting Height - Maximum | 14.9 m |
| Dumping Height - With Clearance to Open Dipper Door | 9.4 m |
| Cutting Radius - Maximum | 22.8 m |
| Radius of Level Floor | 16 m |
| Revolving Frame Tail Swing Radius | 9.3 m |
| Note (1) | Optimal working ranges based on loading a Cat® 793F truck. |
| Note (2) | *All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads. |
| Type | Automatic, single-line system for open gear lubricant and grease. |
| Components (1) | 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
| Drive | IGBT Acutrol drive system. |
| Power Requirements - Peak power | 3106 kW |
| Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V |
| Power Requirements - Average Power Demand | 777-1087 kW (1,042-1,458 hp) |
| Power Requirements - 60 Hz | 7,200V |
| Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V, 11,000V |
| Note | Other voltages available to suit customer requirements. |
| Rope Data - Crowd - Diameter | 64 mm |
| Rope Data - Dipper Trip - Diameter | 16 mm |
| Rope Data - Hoist - Diameter | 70 mm |
| Rope Data - Boom Suspension - Diameter | 83 mm |
| Rope Data - Crowd - No. | 1 |
| Rope Data - Retract - No. | 1 |
| Rope Data - Dipper Trip - No. | 1 |
| Components | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
| Rope Data - Boom Suspension - No. | 4 |
| Crowd | Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
| Rope Data - Hoist - No. | 2 |
| Rope Data - Retract - Diameter | 64 mm |
| Note | High impact ropes available as an option |
| Components (2) | External fast fill from lower level. |
Related Products
Title
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it
| 100 | 200 | # | # |
|---|---|---|---|
| 1 | # | 1 | # |